Rubber Fenders from Hira Indutries (Dubai)

Go down

Rubber Fenders from Hira Indutries (Dubai) Empty Rubber Fenders from Hira Indutries (Dubai)

Bài gửi by hira_vietnam on Sun Sep 15, 2019 4:16 pm

Rubber Fenders are designed to prevent boats/ships and the dock from being damaged during the mooring process or during berthing process.


MATERIALS
The Fenders are made of high impact resistant extruded rubbers either in EPDM or Natural Rubber. Standard color is black. Coloured fenders are available on request. They have excellent weather resistance, ozone resistance, crack resistance and high abrasion resistance.

TYPES
The Fenders are available in the following types.

D-Fenders
Cylindrical-Fenders
Arch Fender
Block Fender
Cone Fender
Cell Fender
W & M Fender
Wing Fender
Tug Fender
Composite Fender
Element Fender
Square Fender
Customized Fenders can be manufactured as per client requirement.

STANDARD LENGTH
The standard length of the Fender is 4 meters.

INSTALLATION
The Fenders can be fixed horizontally to a wall or mounted in short vertical strips on flat or curved surfaces.

D Fender

D-Fender is d-section profiles which are wide uses as beltings on tugs and other workboats. D fenders can be supplied with either a circular bore for extra wall thickness and durability or a D-bore for securing with a flat bar. All D fenders can be cut to length, drilled, or pre-curved as required.

Cylindrical Fender

Cylindrical Fender has been used for many years for ship and wharf protection. Cylindrical rubber fenders have many advantages. It’s a very robust and simple type of fender which is easy to install. Installation of cylindrical fenders can be simply achieved by using bars, chains or ropes.

Arch Fender

Arch Fender is a traditional V type and has been popular for many years. Their strong and simple construction suits them to a wide variety of berths and wharves where they will give trouble-free service under the most worse conditions. All Arch Fenders have the same construction with embedded steel mounting plate vulcanized into base flanges.

Block Fender

Block Fender can be supplied in a wide range of dimensions and shapes(rectangular/square). Therefore this fender is widely used at quays, boats, tugs, barges but also at bridges, locks, and other construction environments. The fenders are extruded. All dimensions can be supplied with a cylindrical chamber, D-shaped chamber or without chamber. It allows for various attachment methods such as bolts and straps.

Cone Fender

Cone Fenders are the latest generation of cell fender combining excellent energy capacity with low reaction force to give the most efficient performance of any other fender.

Cell Fender

Cell Fender is one of the most proven and reliable fenders ever designed. The large mounting panels help to distribute the load over the back of the fender panel frame and allow easy installation of the mounting bolts.

W & M Fender

This type of fender is very suitable for application on the bow and stern of tugs, supply vessels, and ice breakers. The grooves on the top of the fender give an extra grip and low pressure while pushing.

Wing Fender

Wing Fenders are used as an alternative for the protection of vessel walls, docks, and berths. Wing fenders are generally mounted in a profile and easy to install if replacement is required.
hira_vietnam
hira_vietnam
Ordinary Seaman

Tổng số bài gửi : 2
Điểm kinh nghiệm : 6
Ngày tham gia : 15/09/2019

Về Đầu Trang Go down

Về Đầu Trang


 
Permissions in this forum:
Bạn không có quyền trả lời bài viết